|
Podwórny, J.; Dudek, K.; Psiuk, B.; Suwak, R.; Związek, K.; Holleyn, F., M.; Krause, O.; Brochen, E.; Dannert, C. |
Anomalous thermo-mechanical behaviour of sol-gel bonded alumina castables under cyclic heating and cooling conditions |
|
Proceedings 62nd International Colloquium on Refractories (ICR) (2019) |
|
Brochen, E.; Sollbach, M.; Dannert, C.; Erbar, L.; Krause, O.; Abdelouhab S.; Pilate, P. |
Investigation of the tendency for failure of refractory castables in the wear lining of a steel ladle using elongated or cubic shaped tabular alumina |
|
refractories WORLDFORUM 11 (2019), 51-58 |
|
Pilate, P.; Preux N.; Lardot, V.; Cambier F.; Brochen, E.; Dannert, C.; Holleyn, F.; Krause, O. |
High-temperature mechanical characterisation of in-situ forming spinel-alumina castables using magnesia or magnesite as raw material |
|
refractories WORLDFORUM 11 (2019), 82-87 |
|
Erbar, L.; Steffen, T.; Krause, O.; Brochen, E.; Dannert, C.; Abdelouhab S. |
Splintered versus cubic gains in high alumina castables – Part I: Examination of the impact of the particle shape on the explosion resistance |
|
Proceedings 16th Unified International Technical Conference on Refractories (UNITECR) (2019), 73-76 |
|
Abdelouhab S.; Pilate, P.; Brochen, E.; Sollbach, M.; Dannert, C.; Erbar, L.; Krause, O. |
Splintered versus cubic gains in high alumina castables – Part II: Influence of aggregate shapes on thermomechanical and microstructural changes during the initial heat-up |
|
Proceedings 16th Unified International Technical Conference on Refractories (UNITECR) (2019), 77-80 |
|
Brochen, E.; Sollbach, M.; Dannert, C.; Erbar, L.; Krause, O.; Abdelouhab S.; Pilate, P. |
Splintered versus cubic gains in high alumina castables – Part III: Assessment of the tendency for failure in the wear lining of a modelled steel ladle using the drucker-prager failure criterion |
|
Proceedings 16th Unified International Technical Conference on Refractories (UNITECR) (2019), 81-84 |
|
Holleyn, F.; Krause, O.; Brochen, E.; Dannert, C.; Podwórny, P.; Dudek, K. |
Matrix design in high-alumina refractory castables – Part I: Enhanced sintering at low temperatures in service, long-term investigations and microstructure evolution |
|
Proceedings 16th Unified International Technical Conference on Refractories (UNITECR) (2019), 601-604 |
|
Brochen, E.; Dannert, C.; Holleyn, F.; Krause, O.; Podwórny, P.; Dudek, K. |
Matrix design in high-alumina refractory castables – Part II: Assessment of the brittle-ductile transition temperature and ways to influence it |
|
Proceedings 16th Unified International Technical Conference on Refractories (UNITECR) (2019), 605-608 |
|
Kasper, J.; Dannert, C.; Koch, A.; Krause, O. |
Impact of Ca2+ dissolution from CAC on the stability of matrix suspensions of deflocculated refractory castables: from mixing to the first setting |
|
Proceedings 62nd International Colloquium on Refractories (ICR) (2019), 25-29 |
|
Kasper, J.; Dannert, C.; Koch, A.; Krause, O. |
Recycled raw materials in refractory castables – part 1/3: Water soluble ions from recycled refractory raw materials in alkaline solution |
|
Proceedings 16th Unified International Technical Conference on Refractories (UNITECR) (2019), 15-B-6 |
